PDA

View Full Version : Forum error?


Rikki-UK
19-02-2010, 04:26 PM
Before the change I could only access my own teams sub forum (ours is actually a link to our own forums) Now I can see and read the latest posts in all the teams forums that are hosted here

That may be a deliberate change, but thought I would mention it !!

Simon Bentley
19-02-2010, 05:48 PM
It is a deliberate change.

What you state was previously the case, however precious few people were registered to the relevant groups so couldn't even see their own forum, so they were drastically under used.

The logic now is that is something is posted in a local forum that is a local matter others will not be interested anyway. However if it is of wider interest then it is most likely in the wrong forum anyway and can be moved to a more appropriate one.

mark avo
19-02-2010, 06:27 PM
It is a deliberate change.

What you state was previously the case, however precious few people were registered to the relevant groups so couldn't even see their own forum, so they were drastically under used.


Damn fine idea - That was the was it was on the old forum, then someone decided they should all be private & at that point they seemed to stop being used.

Patrick Molloy
19-02-2010, 06:32 PM
I've lost my sig, avatar response groups and whats a "Junior Member" supposed to be?
Looks like alll my info is gone.:confused:

peter willis
19-02-2010, 06:39 PM
yea lost all mine as well just have to re load them in user cp

Patrick Molloy
19-02-2010, 06:47 PM
Ok .......
wilco

Simon Bentley
19-02-2010, 06:49 PM
They won't display yet anyway - custom fields will be being added in the coming days.

Patrick Molloy
19-02-2010, 06:52 PM
Pete how did you get your regions logo below your sig? I havethe SE4x4Response one showing in the CP but it doesn't show in the preview...nor when I mail (of course)

peter willis
19-02-2010, 06:57 PM
click next to added pic where it says add then it will add a sig)(sig in boxs above

all i did then was click on logo look at propertey and copy the www. link then paste it between the )(sig and it worked

hope that make sence :):)

Simon Bentley
19-02-2010, 07:02 PM
I'm not sure how signatures are set up at the moment but please refrain from using large images - if they aren't already they will be restricted in the future in order to try to keep the page flow reasonable.

Plan is to have a whole load of avatar size logos for all groups available shortly.

Patrick Molloy
20-02-2010, 07:26 AM
Pete: thanks. I have it back. My SE4x4R logo also links to my group's forum
:)

WessexMario
20-02-2010, 09:03 AM
Plan is to have a whole load of avatar size logos for all groups available shortly.

A few ideas about avatars and signatures ...

What would be really nice is to have two avatars for each member, a personal one (as now), and a group one. If they were side by side, or on opposite sides of, the post header bar then page space would be conserved.
The group one would only be selectable from a list (or set by admin), and would also link to that group's official website.
Perhaps make the maximum height of the personal avatar more restrictive than the maximum width. (eg: Patrick Molloy's current avatar in this topic). say 90px high by 200px wide - allowing a bit of extra width won't impact topic readability.
Then there would be no need to allow any images in the signature, which would save a lot of vertical screen estate.
To the same end, maybe restrict signatures to a maximum number of lines.
Mario

John Potts
20-02-2010, 10:16 AM
That sounds like a good idea :)

mark avo
20-02-2010, 06:13 PM
Yes, please restrict sigs if poss. I know I can switch them off, but there's nothing worse than seeing the same logos/signatures etc time after time

TimChilde
20-02-2010, 09:44 PM
I'd just got my sig how I wanted it, and now I realise I haven't got a copy of the code :-(

Oh well!!

Personally, I think the group logo is pointless in the sig as we all know that you're in 4x4R (as you're on the site) and which group from the custom fields.
I used mine for links to the groups website, twitter feed, facebook page etc.

TimChilde
20-02-2010, 09:58 PM
It is a deliberate change.

What you state was previously the case, however precious few people were registered to the relevant groups so couldn't even see their own forum, so they were drastically under used.

The logic now is that is something is posted in a local forum that is a local matter others will not be interested anyway. However if it is of wider interest then it is most likely in the wrong forum anyway and can be moved to a more appropriate one.

Though I agree with this idea, I've just realised that all the other groups posts (that I'm not interested in) are popping up in my 'New Posts' search. That might be a pain for some people - especially, for example, as WM are using that area for their main forum so it should have lots of traffic!!

robin-baldwin
21-02-2010, 11:18 AM
My page keeps flagging up most threads as having unread posts when I have just read them. Is this my computer or the host?

Tony Ferrari
21-02-2010, 05:15 PM
I get the same, it seems to work in the forums themselves but the index page needs to be reset manually (double click on the symbol), I'm sure this can be done automatically but we are learning as we go.

Tony

GrahamPowys
22-02-2010, 02:27 PM
My page keeps flagging up most threads as having unread posts when I have just read them. Is this my computer or the host?

Mine's doing the same, but not all the time. Last time I looked I had no unread threads, now this time I've got loads.

Also how do I stop being notified of replies to threads I've posted on. I haven't asked for this to happen.

patrick
22-02-2010, 02:37 PM
The 'read posts/threads' options have been set so they may be slightly more friendly now, moved off cookie based methods.

To unsubscribe from a thread go to 'Control Panel' from the right hand menu, then 'List subscriptions' and unsubscribe from whichever threads you don't want to subscribe to.

To change your default subscription options click 'edit options' in the control panel then change 'default thread subscription mode'.

Cheers

Patrick

GrahamPowys
22-02-2010, 03:47 PM
Thank you for that.